The Sealite range of Aquamoor Mooring Buoys are designed to offer customers long life and are suitable for most locations. The buoys are capable of supporting substantial loads, with the Aquamoor-1000 offering increased visibility and buoyancy in deeper waters.
The Aquamoor range is available in 650mm and 1000mm diameter. The Aquamoor-1000 has a 1000mm diameter offering increased visibility and buoyancy in deeper waters.
The mooring buoys are rotationally-moulded from UV-stabilized virgin polyethylene to a 7mm wall thickness, and are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage to the outer layer.
The large galvanised mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter.
The mooring tube is not moulded into the buoy but slides into a tubular section that runs down the centre of the buoy enabling the tube to be replaced at any stage during the product’s service life.
Sealite’s Aquamoor Mooring Buoys are capable of supporting substantial loads, and are available in a range of colours for clear visibility.
Aquamoor Mooring Buoys Features
- High visibility colours
- No painting ever
- Strong, polyethylene construction
- Large galvanised mooring tube
- Polyurethane foam filled to prevent water ingress
- Clear identification with optional graphics
- AQM650: 70kg reserve buoyancy
- AQM1000: 145kg reserve buoyancy
Aquamoor Mooring Buoys Options
- Mould-in graphics